This 841cc Saab two-stroke inline-three engine is joined to a four-speed gearbox, and they are mounted to a test stand along with a radiator, battery, fuel canister, and ignition components. The engine is equipped with a single Solex carburetor, starter, generator, air cleaner, and exhaust system. The stand has a control panel with an ignition switch, choke cable, coolant temperature gauge, and starter button. Acquired by the seller in 2023, this Saab drivetrain and test stand are now offered at no reserve in Raleigh, North Carolina.
The 841cc two-stroke inline-three features a cast-iron block, an aluminum cylinder head, and a Solex 40 BI carburetor mounted to a throttle body. Components installed on the engine include a generator, distributor, water pump, mechanical fuel pump, electric starter, air cleaner housing, and an exhaust system.
The engine block casting number is shown above. Casting numbers on other components are shown in the gallery.
A four-speed gearbox is joined to the engine and is equipped with clutch hydraulics, and the inner sections of two drive axles are attached.
The engine and transmission are mounted to a rolling test stand along with a radiator, battery, fuel canister, ignition coil, and voltage regulator. The steel framework is finished in gray.
A vertical control panel houses a toggle switch for the ignition, a coolant temperature gauge, a choke cable, and a push-button switch to engage the starter. A California license plate is attached to the panel.